Table of Contents
![[Download][Firmware] Rooting, Recovery Custom and Stock Roms Collections For Bluboo Maya Max. 9](https://wapzola.com/wp-content/uploads/2017/04/bluboo_maya_1.jpg "[Download][Firmware] Rooting, Recovery Custom and Stock Roms Collections For Bluboo Maya Max. 9")
This is the collections of best custom and stock Rom available for the Bluboo Maya Max Smartphone You just have to download and install them and choose best one to use as your daily driver on your phone.
Note: You must have a Custom recovery Installed on your phone in other to Install a custom rom or a modified stock rom. Download TWRP custom recovery below For Bluboo Maya Max. You can install this recovery with Recovery flasher or Mobileuncle tools, check out this post here and follow the instructions Here
Needed Important File Download Links:
TWRP 3.0.2 Custom Recovery
Download
SP Flash Tools
Download
Android ADB device drivers( For sp-flashtool)
Download
MTK6750 Scatter File (scatter.txt and recovery.img)
Download
Supersu.zip ( For rooting your phone)
Download
Bluboo Maya Max SMARTPHONE OFFICIAL FIRMWARE DOWNLOADS
Firmware Version 3.06
Download Link
Firmware Version 3.04
Download Link
Firmware Version 3.03
Download Link
Firmware Version 3.01
Download Link
Firmware Version V2.0.1
Download Link
or
Baidu link (use translator)
How to install stock Firmware/Rom:
- Download and install SP Flash Tool from above link
- Download and install Android ADB device drivers from above link
- Download any stock official ROM version you want from above links
- Run sp Flash Tools as administrator
- Select scatter loading
- Then choose MT6580_ANDROID_SCATTER.txt
- Click on Download or Upgrade firmware according to your phone state.
NOTE: You will have to choose DOWNLOAD only if your device is brick and you want to unbrick it. otherwise you can just select FIRMWARE UPGRADE.
- Connect your phone switched off to your pc
- The progress bar should start running
- You will then see a success message with (a green circle with ok).
- Disconnect the phone.
- Do a Factory Reset in recovery mode to prevent errors.
How to install a custom TWRP Recovery:
Requirements:
* SPFlashTools
* The TWRP pack by MDSdev (scatter.txt and recovery.img)
* Bluboo MayaMax with USB-C cable in good condition
Installation:
* We run the SPFlashTools in administrator mode
* In the Scatter-loading file box, select the scatter that we previously unzipped from the TWRP by MDSdev .zip pack, automatically configures the recovery.img file and is ready for flashing.
* Click the Download button
* Connect the MayaMax off to start the Flasheo.
* Start in recovery mode to prevent the stock from being reinstalled.
Note: It’s necessary to allow system modification to maintain TWRP at reboot.
Is also necessary to flash latest supersu.zip before reboot to avoid any bootloop..
If twrp starts correctly, please allow system mod, flash supersu.zip and enjoy rooted maya max
List of Available CUSTOM ROMS
1. CyanogenMod 13.0 for Bluboo Maya Max by GearLabs
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Gapps below:
https://opengapps.org/ <== Platform: ARM64 | Android: 6.0 | Variant: Mini/Micro/Nano/Pico (choose yourself depending on your requirements)
Bugs:
Camera HDR doesn’t work.
Voice over LTE, aka VoLTE or HD Voice, isn’t supported
Camera Auto-Exposure is less efficient
==========================================================================
2. Resurrection Remix v5.7.4 By MDSdev
Bugs:
- led indicator
- for Bluetooth Multimedia
- Poor lighting in the dark
The Installation
- Download .zip of the ROM drive.
- Download .zip of the Gapps.
- Make a backup of your current ROM ( Not Required).
- Do a thorough cleaning from the TWRP.
- Flashing the .zip of the ROM.
- Flashing the .zip of the Gapps.
- Restart system
Gapps
==========================================================================
3. LineageOS 13 By MDSdev
Hello colleagues today I bring to enjoy the holders of MayaMax, the LineageOS ROM.
The successor of the mythical and extinct Cyanogenmod , hence its name.
Bugs:
- The Notifications of Led. (Green only works)
- Low-light camera obscures
Download Gapps
==========================================================================
4. AICP by MDSdev
AICP is known by everyone as the Android Ice Cold Project that started on the HTC Desire HD and since then it has become a stable ROM and with the best community you can find! this month I bring another custom rom to the MayaMax, this time it is AICP, I hope you enjoy it.
Bugs:
- led indicator (only green)
- Poor low light camera obscures
==========================================================================
How to install custom ROM
- Download .zip of the ROM drive of your choice above.
- Download .zip of the Gapps.
- Download the .zip of the supersu from above download link.
- Make a backup of your current ROM ( Not Required).
- Do a thorough cleaning from the TWRP ( Wipe cache and factory reset).
- Flash the ROM .zip.
- Flashing the .zip of the Gapps.
- Flashing the .zip of the supersu. ( To root your phone)
- Restart system.
- Enjoy.
How to Root your phone: (If you are on Stock ROM)
- Make sure you have already installed a TWRP custom recovery
- Download Supersu.zip SuperSU (flashable using TWRP):
- Copy the zip file to the root of your Sd-card
- Reboot your phone into recovery mode
- Click and install Supersu and make sure installation is successful
- Your are rooted
- Reboot your phone
