This is the Official latest released Android 5.0 lolipop stock Rom available for the UMI Rome a flagship phone from UMI with dual sim capabilities. UMI Rome Users can now update their device by using the firmware direct download links in this post and by following the simple installation
instructions. This firmware file can be use to update your phone, unbrick, fix errors and it also comes with many new features and great improvement which will make your phone more stable. Installing a stock rom will also Improve battery life by optimizing battery consumption and indication.
There are two different tools for flashing a firmware for this device, you can either use Sp Flashtools or RootJoy. The stock firmwares and flashing instruction are both available in this post.
UMI ROME Phone Specifications
Year of release: 2015
Operating system: Android 5.1
Battery Capacity. (MAh): 2500
Dimensions (ShhVhT mm): 77 x 153,8 x 7,9
Weight (g): 177
Processor Type: MediaTek MT6753
Clock Speed ??(MHz): 1300
Memory & Ram
RAM (MB): 3072
Built-in Memory (GB): 16
Conectivity & Network
Phone: GSM (850, 900, 1800, 1900), LTE (800, 1800, 2100, 2600), UMTS (900, 2100)
Wi-Fi: 802.11a, b, g, n
2 2G, 3.5G (HSDPA, HSDPA +, HSUPA, HSPA, HSPA +), 3G UMTS / WCDMA, GPS, GLONASS and Dual Sim Card Support
Screen size: 5.5 “
Screen Resolution (px): 720 x 1280
Screen Type: AMOLED
Graphics Processing Unit: Mali-T720 MP3
Rear Camera (MP): 8
Front Camera (MP): 2
Headphone Output: 3.5
FM-radio, G-Sensor, Light Sensor, Proximity Sensor
Screen and Input:
Touch screen: capacitive
buttons: touch buttons
Memory cards: microSD, microSDHC
Connectors: USB-host / OTG, microUSB
Flashing Requirements :
- A pc with healthy usb port and UMI Rome cable
- A UMI Rome device with a minimum of 20% battery charge
- Make a backup copy of your personal files and contacts, messages and programs
- Make sure Vcom port driver is installed on your pc. Download it here:
Firmware Direct Download Links
Firmware for Sp-flashtool
v3.04 the firmware for the UMI Rome (Sp-Flashtool)
v3.03 the firmware for the UMI Rome (Sp-Flashtool)
Firmware for rootjoy
UMI ROME Flyme OS 4.5.3A 0119 ( flash with rootjoy)
UMI ROME Flyme OS 220.127.116.11beta 03 ( flash with rootjoy)
UMI ROME OFFICIAL V3.04 0325 ( flash with rootjoy)
UMI ROME IUNI OS V3.0 0925 0222
Note: The Above Stock roms is only for the Umi Rome Do not attempt to flash on other or similar devices
How To Flash Firmware with Sp-Flashtool:
- Run sp Flash Tools as administrator
- Select scatter loading
- Then choose ANDROID_SCATTER.txt
- Click on Download or Upgrade firmware according to your phone state.
NOTE: You will have to choose DOWNLOAD
only if your device is brick and you want to unbrick it. otherwise you
can just select FIRMWARE UPGRADE.
- Connect your phone switched off to your pc
- The progress bar should start running
- You will then see a success message with (a green circle with ok).
- Disconnect the phone.
- Do a Factory Reset in recovery mode to prevent errors.
For more information check out this post Here
We are sorry that this post was not useful for you!
Let us improve this post!
Tell us how we can improve this post?