Table of Contents
 |
| Ulefone Be Touch 2 |
This is the Official latest released stock Rom available for the Ulefone Be Touch 2 a phone with dual sim capabilities. Ulefone Users can now update their device by using the firmware direct download links in this post and by following the simple installation instructions.
This firmware file can be use to update your phone, unbrick, fix errors and it also comes with many new features and great improvement which will make your phone more stable. Installing a stock Rom will also Improve battery life by optimizing battery consumption and indication.
Firmware Features and descriptions:
- Official Firmware Ulefone Be Touch 2
- Including Google Gapps and Play Store
- No Root access
- Improve battery life by optimizing battery consumption and indication.
- Lift max volume in earpiece
- Add U-launcher which can be applied under “Home” settings.
- Add U-browser.
- Delete Ulefone website and facebook page from app drawer
- Improve battery consumption during standby.
- Other minor optimizations and bug fix.
Tip: Please fully charge and drain the battery two times after installation for the new software to record a complete drainage curve.
Ulefone Be Touch 2 Phone Specifications
Phone Overview
Manufacturer: UleFone
Model: Be Touch 2
Year of realease: 2015
Operating system: Android 5.1
Battery Capacity. (MAh): 3050
Body dimensions
Dimensions (ShhVhT mm): 77,4 x 158,1 x 8,6
Weight (g): 160
CPU
Processor Type: MediaTek MT6752
Clock Speed ??(MHz): 1700
Memory & Ram
RAM (MB): 3072
Built-in Memory (GB): 16
Connectivity & Network
Phone: GSM (850, 900, 1800, 1900), LTE (800, 1800, 2100, 2600), UMTS (850, 900, 1900, 2100)
Bluetooth: 4.0
Wi-Fi: 802.11a, b, g, n
Other: 2 2G, 3.5G (HSDPA, HSDPA +, HSUPA, HSPA, HSPA +), 3G UMTS / WCDMA, GPS, GLONASS and Dual Sim Card Support
Multimedia
Screen size: 5.5 “
Screen Resolution (px): 1080 x 1920
Screen Type: IPS
Graphics Processing Unit: Mali-T760 MP2
Rear Camera (MP): 13
Autofocus: Yes
Flash: Yes
Front Camera (MP): 5
Speaker: mono
Headphone Output: 3.5
Other Features:
FM-radio, G-Sensor, Gyroscope, light sensor, proximity sensor, digital compass Management and fingerprint reader.
Screen and Input
Touch Screen: capacitive
buttons: touch buttons, a fingerprint reader
Storage
Memory cards: microSD, microSDHC, microSDXC
Connectors: USB-host / OTG, microUSB
Flashing Requirements :
- A pc with healthy usb port and Ulefone Be Touch 2 cable
- An Ulefone Be Touch 2 device with a minimum of 20% battery charge
- Make a backup copy of your personal files and contacts, messages and programs
- Make sure Vcom port driver is installed on your pc. Download it here:
- Download Sp flash tools and install on your pc here:
Firmware Direct Download Links
BeTouch 2_12-10-15.rar ( version released on 12-10-15)
Download
Be-the Touch-2_110815 ( Version 110815)
Download
the Be-the Touch-2_150702 ( Version 150702)
Download
Note: The Above Stock roms is only for the Ulefone Be Touch 2 Do not attempt to flash on other or similar devices
How To Flash Firmware with Sp-Flashtool:
- Run sp Flash Tools as administrator
- Select scatter loading
- Then choose ANDROID_SCATTER.txt
- Click on Download or Upgrade firmware according to your phone state.
NOTE: You will have to choose DOWNLOAD
only if your device is brick and you want to unbrick it. otherwise you
can just select FIRMWARE UPGRADE.
- Connect your phone switched off to your pc
- The progress bar should start running
- You will then see a success message with (a green circle with ok).
- Disconnect the phone.
- Do a Factory Reset in recovery mode to prevent errors.
For more information check out this post Here
1 comment
good