Table of Contents
This is the original stock rom for the new Infinix X554 Hot 3, flashing this rom will help you to unbrick and refresh your phone to factory default and solve many problems. Just download the stock firmare below and flash with Sp Flash tool. This Official firmware is for the Hot 3 X554 A2 “(16+1 A2)” version only.
Direct Download Link [1. 2GB]:
X554-W90918-A2-L-20160304
Download Link
Requirements :
- A pc with healthy usb port and your infinix usb cable
- An Infinix hot 3 X554 device with a minimum of 20% battery charge
- Make a backup copy of your personal files and contacts, messages and programs
- Make sure Vcom port driver is installed on your pc. Download it here: MEGA LINK
- Download Sp flash tools and install on your pc here: MEDIAFIRE LINK
How To Flash An Infinix Hot 3 Using Sp-Flash Tools
- Run sp Flash Tools as administrator
- Select scatter loading
- Then choose ANDROID_SCATTER.txt
- Click on Download or Upgrade firmware according to your phone state.
NOTE: You will have to choose DOWNLOAD only if your device is brick
and you want to unbrick it. otherwise you can just select FIRMWARE
UPGRADE.
- Connect your phone switched off to your pc
- The progress bar should start running
- You will then see a success message with (a green circle with ok).
- Disconnect the phone.
- Do a Factory Reset in recovery mode to prevent errors.
12 comments
firmware x405 please
After downloading it, I tried to unzipped it and pop up say achieved corrupted
Try re-download with another browsers or use a file manager the download file is working fine.
hello i flash my phone using this stock rom and it is as though it is now bricked
Try to flash your phone again, using the format+download method and make sure you are using the correct phone model flash file
i hope that will work and don't brick my phone
It will work bro, don't mind the comment of the above user he probably not getting it right.
my progress bar is not starting run . Please can someone help me?
my phone has some white lines as if it is broken on the screen,what could be the problem??
Please don't download this you will brick your phone. Only gets some lines as if the screen has cracked
This Official firmware is for the Hot 3 X554 A2 "(16+1 A2)" version only.
if you are having issues after flashing the firmware it means you are flashing on another infinix hot 3 model.
It is very important for you as a rom flasher to check and follow instructions before flashing firmware thanks.
This Official firmware is for the Hot 3 X554 A2 "(16+1 A2)" version only.
if you are having issues after flashing the firmware it means you are flashing on the infinix hot 3 model.
It is very important for you as a rom flasher to check and follow instructions before flashing firmware thanks.