This is the original stock rom for the new INFINIX HOT 3 LTE X553, flashing this rom will help you to unbrick and refresh your phone to factory default and solve many problems. Just download the stock firmare below and flash with Sp Flash tool. This Official firmware is for the INFINIX HOT 3 LTE X553 “(powered by a QUALCOMM processor.)” version only.
Direct Download Links [1.1GB]:
- A pc with healthy usb port and your infinix usb cable
- An Infinix hot HOT 3 LTE X553 device with a minimum of 20% battery charge
- Make a backup copy of your personal files and contacts, messages and programs
- Make sure Vcom port driver is installed on your pc. Download it here: MEGA LINK
- Download Sp flash tools and install on your pc here: MEDIAFIRE LINK
How To Flash An Infinix Hot 3 LTE Using Sp-Flash Tools
- Run sp Flash Tools as administrator
- Select scatter loading
- Then choose ANDROID_SCATTER.txt
- Click on Download or Upgrade firmware according to your phone state.
NOTE: You will have to choose DOWNLOAD only if your device is brick
and you want to unbrick it. otherwise you can just select FIRMWARE
- Connect your phone switched off to your pc
- The progress bar should start running
- You will then see a success message with (a green circle with ok).
- Disconnect the phone.
- Do a Factory Reset in recovery mode to prevent errors.