This is the collections of original stock rom for the NOMU s10 and NOMU s20, flashing this rom will help you to unbrick and refresh your phone to factory default and solve many problems. Just download the stock firmware below and flash with Sp Flash toolor you can also flash using your custom TWRP Recovery.
This Official firmware is for both the NOMU s10 and NOMU s20. Do not attempt to flash on any other NOMU Android Smartphones and also make sure you choose and install the appropraite Stock Firmware version for your device.
Some of the download links are not in English language, you must use a browser with automatic translation i recommend google Chrome.
Official Stock Firmware For NOMU s10 Only
Firmware v1.0.2 for Nomu s10 install with Flash Tool
Download link
Or
Alternate Link
Firmware v1.0.2 for Nomu s10 install with Flash Tool MEGA links – from the manufacturer
Download link
System and Boot from the drain to V1.0.3_2016_10_24 Nomu S10 (backup TWRP) it was backed up using TWRP 3.0.2-2
Download
Firmware 1.0.3 for Nomu s10 for FlashTool
Download link
Password for archive: geekbuying.com
Official Stock Firmware For NOMU S20 Only
Firmware v1.0.2 for Nomu s20 for Flash Tool
NOMU_S20_COMMON_V1.0.2_2016_10_09_FQ5C23WTE1D.XWP.NOMU.M0.HB.H.SM.1009.V3.02
Download Link
Firmware v1.0.2 for Nomu s20 install with SP-FlashTools MEGA LINK – from the manufacturer
Mega Download Link
How To Flash Firmware with Sp-Flashtool:
- Run sp Flash Tools as administrator
- Select scatter loading
- Then choose ANDROID_SCATTER.txt
- Click on Download or Upgrade firmware according to your phone state.
NOTE: You will have to choose DOWNLOAD
only if your device is brick and you want to unbrick it. otherwise you
can just select FIRMWARE UPGRADE.
- Connect your phone switched off to your pc
- The progress bar should start running
- You will then see a success message with (a green circle with ok).
- Disconnect the phone.
- Do a Factory Reset in recovery mode to prevent errors.
For more information check out this post Here
Leave a Comment