Table of Contents
This is the original stock rom for the Doogee LEO DG 280 Firmware, flashing this rom will help you to unbrick and refresh your phone to factory default and solve many problems. Just download the stock firmare below and flash with Sp Flash tool.
- A pc with healthy usb port and DOOGEE LEO DG280 cable
- An DOOGEE LEO DG280 device with a minimum of 20% battery charge
- Make a backup copy of your personal files and contacts, messages and programs
- Make sure Vcom port driver is installed on your pc. Download it here
- Download Sp flash tools and install on your pc here:
Direct Download Links:
Official Firmware r10
- Run sp Flash Tools as administrator
- Select scatter loading
- Then choose ANDROID_SCATTER.txt
- Click on Download or Upgrade firmware according to your phone state.
NOTE: You will have to choose DOWNLOAD only if your device is brick and you want to unbrick it. otherwise you can just select FIRMWARE UPGRADE.
- Connect your phone switched off to your pc
- The progress bar should start running
- You will then see a success message with (a green circle with ok).
- Disconnect the phone.
- Do a Factory Reset in recovery mode to prevent errors.
We are sorry that this post was not useful for you!
Let us improve this post!
Tell us how we can improve this post?