[Download] Stock Official Tecno W4 Firmware

5
5
0
(0)
[Download] Stock Official Tecno W4 Firmware 3

 This is the original stock rom for the new Tecno W4, flashing this rom will help you to unbrick and refresh your phone to factory default and solve many problems. Just download the stock firmare below and flash with Sp Flash tool. This Official firmware is for the Tecno W4.

Download Links:

Version
W4-AW875A-A1-M-20160328
Download

Version
W4-AW875A-A1-M-20160419
Download(Link is in chinese Language)

Requirements : 

  • A pc with healthy usb port and your infinix usb cable
  • A Tecno W4 device with a minimum of 20% battery charge
  • Make a backup copy of your personal files and contacts, messages and programs
  • Make sure Vcom port driver is installed on your pc. Download it here: MEGA LINK
  • Download Sp flash tools and install on your pc here: MEDIAFIRE LINK 

How To Flash An Tecno W4 Using Sp-Flash Tools

  • Run sp Flash Tools as administrator
  • Select scatter loading  
  • Then choose ANDROID_SCATTER.txt
  •  Click on Download or Upgrade firmware according to your phone state.

NOTE: You will have to choose DOWNLOAD only if your device is brick
and you want to unbrick it. otherwise you can just select FIRMWARE
UPGRADE.

  • Connect your phone switched off to your pc
  • The progress bar should start running
  • You will then see a success message with (a green circle with ok).
  • Disconnect the phone.
  • Do a Factory Reset in recovery mode to prevent errors.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

As you found this post useful...

Follow us on social media!

5 COMMENTS

  1. Bro I flash my tecno w4 with the stock rom and it flashed fine but now sim2 is writing invalid IMEI and I cannot receive calls or dial any number using sim2. What is the problem? Just today I received latest system update and I downloaded and while updating the phone display an error saying cannot update.

  2. Bro I flash my tecno w4 with the stock rom and it flashed fine but now sim2 is writing invalid IMEI and I cannot receive calls or dial any number using sim2. What is the problem? Just today I received latest system update and I downloaded and while updating the phone display an error saying cannot update.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.