Latest PACROM Lolipop 5.1.1 rom for Gionee p3

by Abbey banji
0
(0)
Latest PACROM Lolipop 5.1.1 rom for Gionee p3 15

This rom was  Listed by: tnmthanhdev all credit goes to him.
This rom work on Gionee p3 with custom recovery installed.

Features:

Advertisements

    PAC Settings
    Cyanogenmod Features
    True Lollipop 5.1.1
    Totally smooth
    Dual SIM

Latest PACROM Lolipop 5.1.1 rom for Gionee p3 16

How to install
Instruction:

    Go to recovery (must be TWRP 2.6.3.0 or 2.8.5.0)
    Backup your current ROM if you want
    Flash MTK NVRAM TOOL zip: Next (3 times) –> Backup –> Wait until complete –> Exit
    Wipe cache, Dalvik cache, data, system
    Install ROM zip
    Install GApps zip
    Reboot
    Try the ROM a little bit
    Turn off your phone
    Go to recovery
    Flash MTK NVRAM TOOL zip: Next (3 times) –> Restore –> Wait until complete –> Exit
    IMEI is restored
    Enjoy.

Bugs:

    FM Radio
    WIFI Hotspot
    To turn on phone, go to recovery, reboot system
    USSD (check your mobile bill :V)

Working: Everything else…

DOWNLOAD LINKS AND OTHER NECESSARY THINGS

Latest PACROM Lolipop 5.1.1 rom for Gionee p3 17

5.1.1 GApps (choose latest one)
HERE

MTK NVRAM TOOL
HERE

 Download the  ROM
LINK 1
OR
Alternative DOWNLOAD  LINK 2

How to turn off  Turn off Navigation Bar:
Goto:

Advertisements

    Settings
    PAC Settings
    Buttons
    Dimensions
    Navigation Bar Height
    0 DPI (off)

How to enable root:
Goto:

    Settings
    About
    Tap 7 times on Build Number
    Back
    Developer Options
    Root Access
    Apps and ADB
 You can Donate to the developer here to appreciate his work HERE

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

As you found this post useful...

Follow us on social media!

We are sorry that this post was not useful for you!

Let us improve this post!

Tell us how we can improve this post?

You may also like

62 comments

Anonymous August 12, 2015 - 10:57 am

Process of gapps stopped. Even downloaded the latest version

Reply
abbey banji August 12, 2015 - 7:45 pm

Try a Factory reset, also make sure you Wipe cache, Dalvik cache, data, system and re-install the Rom Again.
@-)

Reply
Bhavya Bhargava September 20, 2015 - 1:56 pm

Worked for me man no probs till now

Reply
Anonymous September 29, 2015 - 8:49 pm

I like this rom, please can you post more lolipop roms for gionee p3

Reply
adhi arjun October 10, 2015 - 7:24 pm

Name the service providers hwo supports USSD?

Reply
adhi arjun October 10, 2015 - 7:25 pm

does apps like xender or shareit work on this rom??

Reply
abbey banji October 11, 2015 - 6:38 pm

yes xender is working install the latest version from playstore

Reply
abdulmog mog December 7, 2015 - 4:55 pm

I'm having gionee m3 with custom rom Lg g3 installed in it, please will this pacrom 5.1 lollipop work in my gionee m3. I'm having a working twrp installed and perfectly working in good shape. Please help me Mr Abbey Banji.

Reply
chandan stunner November 1, 2015 - 1:37 pm

Tell me how to go to recovery I.e twrp 2.8.5.0

Reply
abbey banji November 1, 2015 - 4:52 pm

You can boot into recovery by pressing the volume up button and power button together until u see d recovery.

Reply
chandan stunner November 1, 2015 - 1:38 pm

Tell me how to go to recovery twrp I.e is 2.8.5.0

Reply
chandan stunner November 1, 2015 - 1:40 pm

Tell me how to go to recovery I.e twrp 2.8.5.0

Reply
chandan stunner November 2, 2015 - 2:31 pm

Which app is used to flash

Reply
abbey banji November 2, 2015 - 3:57 pm

Use the Twrp Recovery you downloaded

Reply
chandan stunner November 2, 2015 - 2:59 pm

How to flash these files by using what app or by connecting it to system

Reply
abbey banji November 2, 2015 - 3:56 pm

You can use Mobileuncle tools. Apk to flash Twrp recovery just make sure your phone is rooted and put the recovery.img on your SD card

Reply
chandan stunner November 3, 2015 - 1:49 pm

And then what to do plus tell me

Reply
abbey banji November 3, 2015 - 3:23 pm

Have u install the recovery. You must root your phone and download and install the Twrp Recovery before you can install this rom.

Ask me any questions I will answer you. Just follow the instructions in this post to install the rom.

Thank you for your comment.

Reply
chandan stunner November 3, 2015 - 1:58 pm

I did that then what to do m.r abbey banji

Reply
chandan stunner November 3, 2015 - 2:00 pm

I did that then what to do m.r abbey banji

Reply
chandan stunner November 3, 2015 - 3:18 pm

I did that then what to do bro

Reply
abbey banji November 3, 2015 - 3:40 pm

Go to recovery by switching off your phone and pressing the volume up button and power button together.

Backup your current ROM if you want incase of errors

Wipe cache, Dalvik cache, data, system
Install ROM zip
Install GApps zip
Reboot

Reply
chandan stunner November 3, 2015 - 4:24 pm

How to install twrp recovery where it is

Reply
chandan stunner November 6, 2015 - 1:08 pm

Pls tell me how to download that file pls tell me pls

Reply
chandan stunner November 6, 2015 - 1:26 pm

Please please tell me what was the file name twrp where should I download that one pls pls pls tell I'll beg u pls

Reply
abbey banji November 6, 2015 - 8:40 pm

Switch off your phone and press the volume down key and the power button together and tell me what you see.

Reply
chandan stunner November 10, 2015 - 4:35 pm

Tell me please how to download that twrp 2.6.3.0 file send me that link pls

Reply
abbey banji November 10, 2015 - 8:19 pm Reply
chandan stunner November 11, 2015 - 2:09 am

Its inst working send me other link

Reply
Twrp recovery for Gionee p3 Download November 11, 2015 - 9:12 am

Check out the new blog post i created for you. And download the recovery from the new link.

Reply
chandan stunner November 11, 2015 - 2:10 am

Send me a screen shot also

Reply
Unknown November 18, 2015 - 12:48 pm

After flashing this ROM, I cannot boot to recovery anymore . I ROM works just fine though.

Reply
re-Flash gionee p3 recovery November 18, 2015 - 2:50 pm

Please kindly re-flash your recovery click on the link or check my new post. Thanks

Reply
Xian Huang November 18, 2015 - 12:49 pm

After flashing this ROM, I cannot boot to recovery anymore.. The ROM works just fine though

Reply
Dharam November 30, 2015 - 10:39 am

I flashed my gionee p3 using this rom and everything working fine but i lost my IMEI, S/N no. and BT address so mobile network not working it shows " emergency call only" and i dont have any back up file of my old imei, s/n and bt address,. So how can i get it back and solve my mobile network problem. Can u help me plz.??
Thank you in advance.

Reply
abbey banji November 30, 2015 - 11:49 am

hi Dharam, you can re-write back your imei using Engineering mode (mtk).apk
you can download the Engineering mode (mtk).apk from playstore.
>>> Open engineering mode>>>Click on Engineer Mode (MTK)>>>Swipe left to Connectivity >>>click on CDS Information >>> Radio Information.
>>>For Phone 1:
“AT +EGMR=1,7,”YOUR NEW IMEI NO” (make sure you space AT +EGMR)

>>>For Phone 2:
“AT +EGMR=1,10,”YOUR NEW IMEI NO”

¶ Press the “Send At Command” (You should receive a message that your ‘AT command sent)

¶ Reboot and dial *#06# to confirm your new IMEI.

You should be able to get network signal.

Reply
Dharam November 30, 2015 - 4:47 pm

Thanks 4 replaying,

I tried mtk engineering mode app but its not working it shows "cannot find EngineerMode app" and mobile uncle tool also not working so i retrived it from chamelephone app and my imei is restored.
But my mobile network is not working yet.
And i didn't retrived my Serial No (S/N no) and BT address yet.

Reply
abbey banji November 30, 2015 - 8:36 pm

Your phone NVRAM might have been corrupted by flashing the rom. You will have to backup another gionee p3 NVRAM using MTK DROID TOOLS with pc and restore it back to your phone.

I have some NRAM Backup on my Pc but they are not for Gionee p3, if you need them i can upload them for you or send it to your email. I don't know maybe it will work, but you can try it. Reply me if you need it.

I will have to create a new blog post and guide for you.

Reply
abbey banji November 30, 2015 - 8:41 pm

And please tell me, Which recovery you are using.

Reply
Dharam December 1, 2015 - 6:20 am

Yaaa please give me that NVRAM backup bcz i dont have another gionee p3 so that i can take back up,
You can send me to my email dharam7002@gmail.com or upload link here.
And m usingTeam Win Recovery Project (TWRP) 2.8.5.0

Reply
Amrit Singh December 4, 2015 - 8:34 am

How i can get my phone into recovery mode after installing this rom. I tried power button and volume up button to get my phone into recovery mode but this does not work.

Reply
abbey banji December 4, 2015 - 9:15 am

You will have to re-flash your recovery again.
1. Download Mobileuncle tools.apk from playstore
2. visit this post to download the new TWRP RECOVERY for your phone

https://phonetweakers.blogspot.com/2015/11/downloadrecovery-twrp-lollipop-custom.html

3. you will be able to reboot into recovery with mobileuncle tools or any other way

Reply
abdulmog mog December 7, 2015 - 10:52 pm

I'm having gionee m3 with custom rom Lg g3 installed in it, please will this pacrom 5.1 lollipop work in my gionee m3. I'm having a working twrp installed and perfectly working in good shape. Please help me Mr Abbey Banji.

Reply
abbey banji December 8, 2015 - 7:10 am

Don't install the rom it won't work for any other phone apart from gionee p3.

It will brick your phone Don't install it.
I will be posting a rom for Gionee m3 very soon
Thanks

Reply
abdulmog mog December 8, 2015 - 9:03 pm

I downloaded the lollipop you posted that was meant for p3 and flash it, it bricked my gionee m3 but thank God for Twrp, it helped me unbrick my phone, I press the volume up key and the power button together it then boot to recovery I was having another custom rom in my SD card, so i wiped the gionee p3 rom and then flash another custom rom and my phone was back to normal. I will honestly appreciate if you'll help me with lollipop 5.1 for my gone m3. thank you, more grease to your elbows.

Reply
abbey banji December 9, 2015 - 5:51 am

I will try to post a rom for the Gionee m3 today just make sure you keep on checking my new post.

Thank God you managed to unbrick your phone.

Reply
abdulmog mog December 9, 2015 - 8:10 pm

A'ight, thank you for your time and kindness. I'll keep on checking for your new post…

Reply
Arup December 9, 2015 - 11:30 am

i try to flash my p3..
bt my phone recovery mode does not warking..
installation aboard..
pls help me..

Reply
Raja Sekar January 9, 2016 - 9:38 am

how to flash in my gionee p3

Reply
Djoudi Bachir January 14, 2016 - 12:04 am

can i apply this rom on doogee dagger dg550?

Reply
abbey banji January 14, 2016 - 6:29 pm

No DO NOT INSTALL ON DOOGEE DG550, IT WILL BRICK YOUR PHONE. I WILL BE POSTING CUSTOM ROMS FOR DOOGEE DG550 VERY SOON PLEASE BE PATIENT.

Reply
Djoudi Bachir January 24, 2016 - 12:59 am

ok abbey i'm waiting for this rom good lick

Reply
abbey banji January 24, 2016 - 10:34 pm

hi Djoudi Doogee Dg550 Custom Roms is now Available check our latest post.

Reply
Neha Kumari February 2, 2016 - 5:37 am

hello….i need a help sir this rom 5.1.1 working fast in p3 from this original rom KitKat 4.4.1?tell me

Reply
mukesh February 2, 2016 - 6:27 am

hello sir ….
Gionee p3 phone working good one by this rom or not ….
tell.
i have gionee p3 original rom

Reply
abbey banji February 3, 2016 - 4:14 pm

yes it is working bro. make sure you backup your current rom before installing this one. Thanks

Reply
Paul Z February 29, 2016 - 5:27 pm

Do we need to flash from a 5.1 ROM or will it flash nicely from CM 11 on my M3? Thanks for your work on this ROM

Reply
Unknown May 27, 2016 - 7:02 am

world best bad rom in which have no play store ,keyboard not working properly,don,t show sim card

Reply
abbey banji May 27, 2016 - 8:39 am

The Rom is working fine, it is your fault and you didn't follow the instructions.
Follow this simple steps:
Goto Your Custom Recovery,
Wipe cache, Dalvik cache, data, system,
Install ROM zip,
Install GApps zip,
Reboot.

Reply
Ajas MT June 23, 2017 - 4:57 am

Is TWRP is necessary???
Because I am Having CWM…

Reply
abbey banji June 23, 2017 - 7:24 am

you should try to install it with CWM and see if the installations will be succesful without errors.

i don't think TWRP is necessay though, any recovery will do

Reply

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.